Lenze EDK71MMXXX−010 - Manual (Page 97)

Commissioning
Before switching on
7
EDK71MMXXX−010 DE/EN/FR 5.0
97
L
−25−
(
Stop!
Short circuits or earth faults in the wiring destroy the starttec. Check the
wiring for short circuit and earth fault.
To avoid personal injuries or property damages, check
l the wiring for completeness, short circuit and earth fault.
l the "EMERGENCY OFF" function of the complete system.
l whether the rated motor current is correctly set.
)
Note!
Testing mode without motor
If no motor is connected to the starttec and the starttec is enabled
(X3/28 = HIGH), the mains phase failure detection and the I
2 xt monitoring
respond due to the nature of the system.
To prevent the drive from being switched off with an error message, adjust
the mains phase failure detection and the I
2 xt monitoring to "warning"
during the testing mode (C0122 = 1, C0123 = 1).