Lenze DDS Function library IOSystem - Manual (Page 6)

1.1 About this Manual
Function library LenzeIOSystem.lib
Preface and general information
1−2
L
LenzeIOSystem.lib EN 1.7
1.1.2 Structure of the descriptions
The descriptions of the individual functions/function blocks as well as system blocks in this Manual
are structured in a standardised manner according to the following pattern:
Function Function block (FB)/
system block (SB)
†
ƒ

„
‚
‡
 Headline with function and identifier
‚ Declaration of the function:
·
Data type of the return value
·
Function identifier
·
List of the transfer parameters
−
ƒ Short description with the most important features
„ Graph showing the function
including all corresponding
variables
·
Transfer parameters
·
Return value
System block/function block chart
including all corresponding
variables
·
Input variables
·
Output variables
Table giving information on the
transfer parameters:
·
Identifiers
·
Data type
·
Possible settings
·
Information
Table giving information about
input and output variables:
·
Identifiers
·
Data type
·
Variable type
·
Possible settings
·
Information
† Table giving information on the
return value:
·
Data type of the return value
·
Possible return values and their
meaning
−
‡ Further information
(comments, tips, application examples, etc.)
1.1.3 Pictographs used in this Manual
Pictohraphs used Signal words
Warning of
material damage Stop! Warns of potential damage to material.
Possible consequences if disregarded:
Damage of the controller/drive system or its environment
.
More notes Tip!
Note! Indicates a tip or note.
1.1.4 Terminology used
Term In this Manual used for
DDS Drive PLC Developer Studio
FB Function block
GDC Global Drive Control (parameter setting program from Lenze)
Parameter codes Codes for setting the function of a function block
PLC
·
9300 servo PLC
·
Drive PLC
·
ECSxA "Application" axis module
SB System block