INFICON Cygnus Editor Software Manual - Manual (Page 68)

4 - 6
IP
N 07
4-
39
4-
P1
A
Cygnus Editor Operating Manual
4.2.2.5 Setting a Mark
The Set Mark button ( Figure 4-9 ) on the Control Panel allows for a Mark, and text
description, to be applied to the data. The Set Mark function will Freeze the graph
and provide a crosshair cursor ( + ) to select the data scan to be marked. Text
information (for the Marks History log) can be added in the Set Mark dialog (see
Figure 4-10 ). That Mark is then indicated along the X-axis with a colored diamond
(see Figure 4-11 ).
Marks are automatically generated for:
Š the start of the Data Logger, to store a "benchmark" of the crystal status
Š any Crystal state change - Crystal Good, Crystal Invalid, Crystal Failure
Š any Channel state change.
Figure 4-9 Set Mark button
Figure 4-10 Set Mark Dialog
Figure 4-11 Mark Indicator on Graph