INFICON Cygnus Editor Software Manual - Manual (Page 37)

2 - 17
IP
N 07
4-
39
4-
P1
A
Cygnus Editor Operating Manual
2.4.3 User Level (Access Levels)
The Cygnus Editor can be operated from one of two User Levels — Advanced or
Normal. These levels, referred to as Access Levels, provide protection against
modifications of controller configurations and System Setup. An Advanced user
may want to completely set up the system and then set the User Level to Normal
for the system operators. The Cygnus Editor system can be password protected to
operate at one of two access levels:
Š Advanced. All system controls are available. The system may be controlled
manually while in Advanced mode.
Š Normal. A limited set of system controls are available. Major functionality that
is not available to a Normal user includes Edit Configuration and any
changes to the System Setup. Many functions are available but provide
read-only access at the Normal user level.
To change the security level, select Tools >> Set User Level.... See Figure 2-14 .
Figure 2-14 Tools >> Set User Level
The Change Access Level dialog will display the current security level. In Figure
2-15 the Current Access Level is set to Advanced.
Figure 2-15 Change Access Level Dialog
When changing from Normal level to Advanced level, enter the correct password
in the Password: field and click OK. To change a Password, click the Change
Password... button, enter the old Password and the new Password in the
appropriate boxes, and click OK. As with any password, it should be remembered
and protected.