beautypg.com

Chapter 3 sqs-242 software, 2 operation – INFICON SID-242 Thin Film Deposition Controller User Manual

Page 33

background image

Chapter 3 SQS-242 Software

3-3

Note: If you enter a name of DEMO and Unlock Code of 5A8CAC8E5586268 the
software will be placed in Demo mode. All features of the software are permanently
available, except that readings from the SQM-242 card are only simulated. The Demo
mode can be disabled by entering a valid Name and Unlock Code later.

3.2 Operation


The SID-242 displays a progress bar during startup, then a User Login screen.


Note: The SQS-242 software ships with one pre-assigned user. The user name is
Super, with no Password. Do not confuse this with the registartion Name and Unlock
Code discussed in the previous section.

Select a User Name from the drop down box, type in the Password, and then click OK
to start the program.

If your software is configured for keyboardless operation, an on-screen keyboard will
appear as shown below. You can use your normal keyboard or mouse/touchpad to
“type” the password, then click Enter. See System Setup, SQM-242 Setup later in this
chapter to enable or disable the on-screen keyboard.