4 setting auto standby, 5 setting the display, Setting auto standby – INFICON HLD6000 Refrigerant Leak Detector User Manual
Page 35: Setting the display

6 Operation
35
Tr
an
sl
ation
o
f the
o
rig
in
al
operatin
g
in
str
u
ct
io
ns
HLD
6000
, k
ina4
3
e1-
a
, 140
8
Screen touch tone
Three possible settings: Off, Soft, Loud.
►
To adjust the volume, select "
> Volume".
Alternatively, when on the touch screen select the button
.
6.3.4
Setting auto standby
As well as having the option to manually switch over into standby mode (
), it is also possible to set up an auto standby function. After a set period of
time where the device is not in use, it is automatically put into standby mode. The follow-
ing settings are available:
Standby off
Set the time between one and 15 minutes.
►
To set up the automatic standby mode, select "
> Set up > Auto Standby".
6.3.5
Setting the display
You can modify the type of display in the "Display Settings" menu by selecting the follow-
ing keys:
"Value display"
– For displaying the measurements as a bar or line graph
– For switching the measurement display on or off
"Value axis"
– "Value axis grid": For switching between a linear and logarithmic view
– "Value axis decades": If the logarithmic view is selected for "value axis grid" then you
can choose whether 1, 2, 3, or 4 decades are displayed.
"Scaling value axis"
– "Auto scale": For switching auto scale on or off
– "Display maximum value (log.) exponent": If the auto scale is switched off and the
logarithmic view is selected then you can set the exponent of the upper display val-
ue.
– "Display maximum value (lin.)": If the auto scale is switched off and the linear view is
selected then you can set the upper display value.
"Time axis"
– For changing the time axis between 15 s, 30 s, 60 s, 120 s, 240 s, 480 s, 960 s
"Units"
For displaying the leakage rate
– g/a (factory setting)
– lb/yr
– mbar l/s
– oz/yr
– Pa m³/s