INFICON HLD6000 Refrigerant Leak Detector - Manual (Page 34)

34
6 Operation
Tr
an
sl
ation
o
f the
o
rig
in
al
operatin
g
in
str
u
ct
io
ns
HLD
6000
, k
ina4
3
e1-
a
, 140
8
6.3 Basic settings
Overview
 To get an overview of the available options, look at the illustration of the menu trees
see "10.2 Menu trees", page 68 .
 You can either carry out your own changes or keep the factory settings,
see Table 3 on
Page 18 or see Table 4 on Page 20 .
 Your settings can be saved at any time to restore to an earlier state if required,
see
"6.3.11 Save parameters", page 40 .
6.3.1 Setting the language
You can choose from the following languages for the touch screen display:
 English (factory setting)
 German
 French
 Italian
 Spanish
 Portuguese
 Chinese
 Japanese
► Select " > Set up > Language".
In order to switch to English from another language directly after switching on the device,
press "EN" on the device's touch screen during run-up.
6.3.2 Setting date and time
Date and time are stored in the following formats:
 Date in the DD.MM.YY format
 Time in the HH:MM format
► Select " > Set up > Date and Time".
6.3.3 Adjust volume
Volume You can adjust a volume. The setting applies to the speaker in the basic unit. Setting range:
0 to 15
Test A tone at the set volume is issued.
Hearing damage from excessively loud signal tones
The volume of the signal tones can exceed 85 dB(A).
► Keep away from the device when setting high volumes.
► Wear ear protection when necessary.