ETC UpdaterAtor v3.0.0 - Manual (Page 3)

E T C Q u i c k G u i d e :
UpdaterAtor Software
UpdaterAtor Software Page 3 of 8 Electronic Theatre Controls, Inc.
Main Window Display
Discovered devices that UpdaterAtor can update will appear in the main window.
• {Update...} - pushes software to all devices, which are at a lower version than what is currently
on the computer, if it is pressed with no devices selected. If devices have been selected,
software will be pushed to them regardless of their current version.
• {Setup Versions} - is used to change versions of software stored on the PC running
UpdaterAtor. See “Setup Versions Display” on page 4.
• “Software on your PC”- lists all the versions that are stored on the computer running
UpdaterAtor. These are the versions that will be sent to the devices. “Not Found” indicates that
there is no software for that device type stored. “Unknown” indicates that software for the
device has been detected but a version could not be identified.
• “Legend”- identifies the meaning of the version icons in the “Software Version” Column.
• {About} - displays information regarding the UpdaterAtor software application. The “About
Window” also displays the number of devices detected by UpdaterAtor.
• {Exit} - closes UpdaterAtor.
N o t e : Click on the column headers to sort by that field.
Click a box to select that device for software update.
Current status of the device
Displays icons to compare the software version on the device to
the version on the PC. See “Legend” for more information.
A diagnostic tool for troubleshooting. For UpdaterAtor to properly
function, all these services must be running.