ElmoMC SimplIQ Digital Servo Drives-Whistle DC Installation Guide - Manual (Page 20)

DC Whistle Installation Guide Installation
MAN-DCWHIIG (Ver. 1.101)
www.elmomc.com
20
3.6. Hardware Requirements
The components that you will need to install your DC Whistle are:
Component Qty
Conn.
Mating
Connector
Function Cable Drawing
Main Power 1 Phoenix 3-pin Plug VP+, PR, PE
Motor Power 1 Phoenix 4-pin Plug PE, M1, M2, M3
Aux. Power 1 Phoenix 2-pin Plug VL+, PR
Main Feedback 1 12-Pin Molex Plug Feedback
I/O 1 14-Pin Molex Plug I/O
Auxiliary Feedback 1 16-Pin Molex Plug Auxiliary
feedback
RS-232 Comm. 1 8-Pin RJ-45 Plug RS-232
CAN Comm. 2 8-Pin RJ-45 Plug CAN IN
CAN OUT
Table 5: Connector Cross Reference