Despatch LCC/LCD2-14-4 Oven Series with Protocol 3 - Manual (Page 53)

LCC/LCD2-14 Series Oven Owner’s Manual A PPENDICES
Version 1 53
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
When the chamber temperature exceeds the High Limit setting on the control, the heater shuts
down, the alarm horn sounds and the red push button switch will illuminate.
To silence the alarm:
1. Depress the Alarm Silence switch (Figure 23).
a. This silences the alarm horn.
b. The red push button switch remains illuminated.

Optional Beacon Light-equipped Units: The red (top) beacon
light will illuminate, indicating a fault has occurred (
Error!
eference source not found. ).
2. Clear the alarm by correcting the
High Limit condition.
3. When the High Limit condition
clears, press Reset on the control.
See Protocol 3 Owner’s Manual
for detailed operation.
4. The red push button switch will go
off, the heater switches on and the
control is functioning correctly.
5. If the High Limit trips repeatedly,
identify the cause and correct the
problem.

When the alarm is triggered by the end of cycle, the alarm will
continue to be active until another process is started.
A
l
Figure 23. Alarm Silence Switch.