Despatch LCC/LCD2-14-4 Oven Series with Protocol 3 - Manual (Page 45)

LCC/LCD2-14 Series Oven Owner’s Manual O PERATION
Version 1 45
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
5.3.6.2. Manual Unlock
If a power failure occurs insert a torx tip tool (provided) and rotate 90 degrees counterclockwise
to allow the chamber door to open. The tool must be turned back to the locked position to allow
electrical operation again.
Figure 22. Door Lock Manual Override Key (LCC/LCD).
Warning!
The LCC/LCD2-14 door
requires a Manual Override Key for use
when power is OFF. The door and panel that require a tool to
open are part of the safety system of the LCC/LCD2-14 Oven. Do
not attempt to permanently mount the Manual Override Key.

Do not remove torx screw from door release mechanism. Manual
Override Key cannot be permanently mounted.