Despatch LCC/LCD2-14-4 Oven Series with Protocol 3 - Manual (Page 23)

LCC/LCD2-14 Series Oven Owner’s Manual A SSEMBLY & S ETUP
Version 1 23
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
4.
Assembly & Setup
Assembly and Setup provides directions for unpacking and installing your LCC/LCD2-14 Series
oven.
4.1. Unpack & Inspect The LCC/LCD Oven
Remove all packing materials and thoroughly inspect the oven for any damage that might have
occurred during shipment.

Note the condition of the carton and plastic cover sheet inside the carton.

Observe all outside surfaces and corners of the oven for scratches and dents.

Check oven controls and indicators for normal movement, bent shafts, cracks, chips or
missing parts such as knobs and lenses.

Check the door and latch for smooth operation.

Check the filter carton for damage
4.1.1. If Damaged During Shipping
If damage occurred during shipping:
1. Contact the shipper immediately and file a written damage claim.
2. Contact Despatch Industries (1-800-473-7373 or 1-952-469-8230 or [email protected])
to report your findings and to order replacement parts for those damaged or missing. Send a
copy of your filed damage claims to Despatch Industries (Despatch Industries, 8860 207th
Street, Lakeville, MN 555044, USA).
3. Check the packing list to ensure you received all the specified components of the oven
system. If any items are missing, contact Despatch Industries to have missing products
forwarded to you.
4. Complete the warranty card and mail it to Despatch within 15 days after receipt of the
equipment.
4.2. Setup The LCC/LCD2-14 Series Oven
4.2.1. Select Oven Location
Danger!
LCC/LCD2-14A Class A ovens are designed for a specific amount of
solvent. Exceeding this amount could result in an explosion. Do not
process closed containers of any substance or liquid in this oven
because they may explode under heat. In case of fire, leave door(s) as
they are. Shut off electricity. Shut off fuel. Call the fire department. Stay
away
.

To check door and latch for smooth operation, use a hollow point torx tip tool and
rotate 90 degrees counterclockwise the manual override in the safety switch. It
must be turned back to the locked position to allow electrical operation.