Maintenance, Electrical power, Fire – Despatch LCC/LCD2-14-4 Oven Series with Protocol 3 User Manual
Page 13: Danger

LCC/LCD2-14 Series Oven
Owner’s Manual
S
AFETY
Version 1
13
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
without these safety devices in place creates hazards that the doors and covers are intended to
render safe for personnel.
The door requires a Manual Override Key for use when power is off. The door and panel that
require a tool to open are part of the safety system of the LCC/LCD2-14 Series oven. Do not open
the door while the machine is running.
The LCC/LCD2-14 is also equipped with a door switch which turns off the heater when the door
is opened.
2.2. Maintenance
Only qualified and trained personnel should perform maintenance or repair.
2.3. Electrical Power
Only qualified and trained personnel should perform electrical maintenance or electrical repair.
Danger!
Contact with energized electrical sources may result in serious
injury or death.
Before performing maintenance, disconnect all electrical power from the machine. Use a
padlock and lockout all disconnects feeding power to the machine.
Never clean, or repair the oven when in operation.
Unauthorized alterations or modifications to the LCC/LCD2-14 Series oven are strictly
forbidden. Never modify any electrical circuits. Unauthorized modifications can impair the
function and safety of the LCC/LCD2-14 Series oven.
2.4. Fire
Keep the LCC/LCD2-14 Series oven clean and free of scrap materials, oil or solvents to prevent
the possibility of fire.
1. Leave door as is.
Danger!
Electrical panels contain high voltage. Disconnect and lock out
the power supply before working inside any electrical panels.
Failure to lock out the power supply can result in death or injury.