Form length (forml) – Dascom T2150 User Guide User Manual
Page 94
Advanced menu
User guide
84
Enter Extended menu mode by pressing the key Online while
switching on the printer.
The display shows Test mode for approx. 1 second and then auto-
matically changes to display ASCII 80 ASCII 136 (only wide printer).
Form length (Forml)
The Formlen function allows you to set the basic form length to
meet your requirements. 11 inches are usual in the USA, as op-
posed to 12 inches in Europe.
Select the Forml menu (2).
Setting options: 12 oder 11 Inch
Default setting: 12 inches for 220–240 V printers
11 inches for 120 V printers
The value defined here is set in all five menus and for all paper
paths. The setting made here is not changed by loading the default
(factory) settings by pressing all four function keys; see section
functions when turning on the printer
Confirm the setting by pressing the Set (1) key.
Testmode
Initializing ...
Online
Setup
2
1
3
4
Formlen AGA
Online
Setup
Back Next
2
1
3
4
Formlen=12" *
Online
Setup
Set < > Exit
2
1
3
4