Setting and activating options (papopt), Activation of tractors (autotra) – Dascom T2150 User Guide User Manual
Page 81
User guide
The Menu
71
Setting and activating
options (PapOpt)
For setting the optional automatic sheet feeders (ASFs) and optional
tractors; see
(page 4). Also regulates the activation of
ASFs and/or optional tractors.
Press PapOpt (3) key.
Activation of tractors (AutoTra)
This parameter only appears if at least one optional tractor is in-
stalled. It regulates the activation of tractors when there is no more
paper left in one of them.
Press AutoTra (2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: Off/T1=T2
Default Setting: Off
If an optional tractor is not installed, Off is displayed (factory de-
fault). If an optional tractor is installed and the Off parameter is acti-
vated, only the selected tractor is supported (either via the menu or
an ESC sequence). If the selected tractor is out of paper, printing
stops.
If an optional tractor is installed and you select T1=T2, the printer will
load paper from the other tractor if the selected one is empty.
Confirm the setting by pressing the Set key (1).
FFmode
PapOpt
Online
Setup
2
1
3
4
Back
Next
AutoTra
AutoASF
Online
Setup
2
1
3
4
Back
Next
AutoTra=Off
*
Online
Setup
Set
<
>
Exit
2
1
3
4