Dascom T2150 User Guide - Manual (Page 79)

User guide The Menu
69
Normal characters and
barcode (Barmode) Allows printing of normal characters on the left and right of the bar-
code.
Press Barmode (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Secured/Unsecured
Default Setting: Unsecured
In secured mode, the space which the barcode characters require
is “protected”. In each line, other barcode or normal characters can
also be printed. These additional characters are printed in the line
currently being printed and and in the subsequent lines, without af-
fecting the barcode which is already being printed. Consequently,
normal characters can be printed in every line to the right or left of
the barcode.
In unsecured mode, the required paper transport for printing bar-
codes and LCP is carried out automatically, it is not possible to print
more than one line of normal characters in the barcode line. All char-
acters in the mixed line are printed such that their bottom edges are
in a straight line. This function may be switched on and off by se-
quences.
This function can be activated/deactivated by sequences.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Barcode Barmode
Online
Setup
2 1 3 4
Back Next
Secured *
Online
Setup
Set < > Exit
2 1 3 4