Dascom T2150 User Guide - Manual (Page 68)

The Menu User guide
58
Selecting interface (Interf.) Selects the interface. Printer is configured either for parallel, Ether-
net or optional serial connection or in automatic change for the par-
allel or the optional serial interface (Shared).
Press Interf. (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Share, Parallel, Serial
Default Setting: Share
Interf.=Share: Printer switches automatically between parallel and
optional serial interface.
Interf.=Parallel: Printer using parallel interface.
Interf.=Serial: Printer using serial interface.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Interface buffer (Buffer) Selects the size of the interface buffer.
Press Buffer (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 0 – 128 KB
Default Setting: 128 KB
If buffer = 0 KB and the serial interface is selected, or if
the setting “Share” is active, the actual buffer size will
be 512 bytes.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to leave the parameter group Interf.. Press the Next key (4)
again to access the next group of parameters.
Serial Interf.
Online
Setup
2 1 3 4
Back Next
Interf.= Share*
Online
Setup
Set < > Exit
2 1 3 4
Buffer
Online
Setup
2 1 3 4
Back Next
Buffer=128 KB *
Online
Setup
Set < > Exit
2 1 3 4