Dascom T2150 User Guide - Manual (Page 103)

User guide Advanced menu
93
Graphic Print Speed
(GrSpeed) This parameter allows improved Graphic Speed independently to
the driver. It affects only the print speed of graphic printouts at
180 x 180 dpi.
Select the GrSpeed (2) menu.
Setting options: Normal/High
Default setting:
High
Normal means 180 dpi normal print speed (full space) and High
means 180 dpi double speed (half space).
Confirm the setting by pressing the Set (1) key.
Improvement of graphic
and barcode print quality
(GrFreq) This parameter has an impact on the print quality of graphics and
barcodes.
Select the GrFreq (3) menu.
Setting options: High/Normal
Default setting:
High
Normal improves the print quality of graphics and barcodes.
High prints graphics and barcodes in a higher speed.
Confirm the setting by pressing the Set (1) key. Change to the next
parameter group with the Next key (4).
GrSpeed GrFreq
GrSpeed=High
GrSpeed GrFreq
Back
Next Online
Setup
2 1 3 4
GrFreq=High
*
Online
Setup
Set
< > Exit
2 1 3 4