Setting character density (cpi), Setting line spacing (lpi), Hapter – Dascom T2150 User Guide User Manual
Page 60: Setting cha
The Menu
User guide
50
Setting character density
(CPI)
Sets the characters per inch (character pitch). The higher the pa-
rameter the smaller the character spacing.
Press CPI (3) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: 5 CPI, 6 CPI, 7.5 CPI, 8.6 CPI, 10 CPI,
12 CPI, 15 CPI, 17.1 CPI, 20 CPI
Default Setting: 10 CPI
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Setting line spacing (LPI)
Sets the lines per inch (line density). The higher the parameter the
smaller the line spacing (random LPI can be selected via the ESC
sequences).
Press LPI (2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: 2 LPI, 3 LPI, 4 LPI, 6 LPI*, 8 LPI, 12 LPI
Default Setting: 6 LPI
Confirm the setting by pressing the Set key (1).
Font CPI
Online
Setup
2
1
3
4
Back
Next
10 CPI
*
Online
Setup
Set
<
>
Exit
2
1
3
4
LPI
Skip
Online
Setup
2
1
3
4
Back
Next
6 LPI
*
Online
Setup
Set
<
>
Exit
2
1
3
4