Paper parameters (paper), Form length (forml) – Dascom T2150 User Guide User Manual
Page 73
User guide
The Menu
63
Paper parameters (Paper)
Selects the paper parameters Formlen (form length), FormAdj (first
printing position) and Head (printhead gap, only if AGA=Off) sepa-
rately for each paper source in the current menu.
Non-installed and with the parameter PapOpt activated options can-
not be selected.
Press Paper (2) key.
You can now choose between the following paper options:
`
Single
`
Tractor 1
`
ASF-F (Single sheet feeder front, option)
`
ASF-R (Single sheet feeder rear, option)
`
Tractor 2 (front, option)
`
Tractor 3 (rear, option)
Select the desired paperway, in our example Single (2). Press Next
(4) key, to proceed to the installed optional paperways.
Form length (Forml)
You can define the form length in one of two ways: via the number
of lines or via standard formats (e.g. DIN A4).
Press Forml (2) key.
If you wish to define the form length via a line format, press Line (2)
key.
Paper AutoTear
Online
Setup
2
1
3
4
Back
Next
Single Trac1
Online
Setup
2
1
3
4
Back
Next
Forml FormAdj
Online
Setup
2
1
3
4
Back
Next
Lines
Standard
Online
Setup
2
1
3
4
Back
Next