Menu parameters, Printing out menu configurations (print), Loading menu configurations (menu) – Dascom T2150 User Guide User Manual
Page 57: D (see, Sary (see
User guide
The Menu
47
Menu parameters
The following section introduces and explains all the possible menu
settings.
Press Setup key.
Press Menu (1) key.
Setup mode and Menu mode may be disabled. Hold
down the Setup key while switching on the printer to
enable menu mode. If you want to enable access to this
mode permanently, you need to change the appropriate
setting in the menu; see
.
Printing out menu
configurations (Print)
Prints the menu configurations using the active paper feed; see
Menu settings (example) (page 75)
Press Print (2) key, to start the printout.
Loading menu
configurations (Menu)
A menu is loaded, you can choose between five menus; see
.
Press Menu (3) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: Load Menu=1/2/3/4/5
Default Setting: Load Menu=1
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Online Tractor1
Tear
Online
Setup
2
1
3
4
Adjust Paperway
Menu Char
Online
Setup
2
1
3
4
Print Menu
Online
Setup
Back
Next
2
1
3
4
Print Menu
Online
Setup
Back
Next
2
1
3
4
Load Menu=1
*
Online
Setup
Set
<
>
Exit
2
1
3
4