Dascom T2150 User Guide - Manual (Page 148)

Emulations User guide
138
PJL commands If a TallyCom III (or compatible) Ethernet interface is installed, you
can use the following PJL commands.
This functionality may be activated via the parameter Jobcntl in the
Advanced Menu.
Sequence Brief description
"ESC"%-12345X@PJL Universal Exit Language (UEL) commands
@PJL ECHO ECHO command
@PJL EOJ
@PJL EOJ NAME= EOJ (End of Job) commands
@PJL INFO STATUS INFO (Information Request) command
@PJL INFO CONFIG INFO of the printer configuration
@PJL INFO VARIABLES INFO of variables which can be set by SET
@PJL INFO MEMORY INFO about the memory of the printer
@PJL USTATUS DEVICE = ON
@PJL USTATUS DEVICE = OFF
@PJL USTATUS DEVICE = VERBOSE
@PJL USTATUS JOB = ON
@PJL USTATUS JOB = OFF
@PJL USTATUS PAGE = ON
@PJL USTATUS PAGE = OFF
@PJL USTATUSOFF USTATUS (unsolicited status) commands
@PJL JOB NAME =
@PJL JOB FILE =
@PJL JOB START =
@PJL JOB END =
@PJL JOB COPY = JOB (Start of Job) commands
@PJL ENTER LANGUAGE Exit PJL and start normal parser
@PJL INFO USTATUS List each type of unsolicited status
@PJL USTATUS TIMED Enables timed unsolicited status