Dascom T2150 User Guide - Manual (Page 138)

Emulations User guide
128
List of available control
codes
The following table shows sequences marked by a if they are
available in the various emulations. The MTPL sequences can be
used within all emulation modes. The corresponding sequences are
marked by a .
If you want to know more about control codes, we recommend
our
Programmer’s Application Manual on this CD-ROM.
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
Signal tone
Control character BS (Backspace)
Deleting a data line
Control character CR (Carriage return)
Start character for MTPL sequences, corr. ESC [
Selecting the printer
Condensed printing OFF (set by or )
Deselecting the printer
Double-wide printing OFF (set by or )
Delete line. Epson: Delete last character
Start character for programming sequence
! Print mode selection
# Bit 8 = unchanged
$ Perform absolute horizontal step
%<0><0> Select ROM character generator
%<1><0> Select download generator
%1 Graphics print with 180 dpi/HQ
%2 Graphics print with 360 dpi/HQ
%3 Graphics print with 60 dpi
%4 Graphics print with 120 dpi
%5 Graphics print with 80 dpi
%7 Graphics print with 240 dpi
%8 Graphics print with 72 dpi
%9 Graphics print with 90 dpi
&.. Define download character
(& Character set ISO 8859-2
(* Character set ISO 8859-5
(+ Character set ISO 8859-1 SAP