COATS ProRide Wheel Balancer - Manual (Page 15)

Important: Always read and follow instructions. • 11
Menu Screen
The menu screen provides you with many possibilities
for accessing programs and presetting the machine
according to your requirements. These settings remain
unaltered even when the machine is switched off.
Buttons enabled:
Menu
Return to previous window
Stop & Exit
Return to Result screen
Optimization (Match Balance)
Select this mode to access the optimization program.
See Optimization (Match Balance).
Dimensions
Access this screen to view the tire/wheel dimension
measurements. See Setting Wheel Dimensions (DIM).
Statistics
Machine Spins/day - Indicates the number of spins
from the first time the machine is turned on for the day.
When the machine is turned off, this parameter remains
stored until the date changes (a new day).
Daily Weight Statistics - Each horizontal line indicates
the number of clip-on and adhesive weights used to
balance the wheels.
• Tot g (tot oz): indicates the daily weight value of the
clip-on and adhesive weights used to balance the
wheels.
• Tot n: indicates the daily number of clip-on and adhe-
sive weights used to balance the wheels.
Under statistics the following buttons are enabled:
➤ Reset
Resets the daily statistics or resets the total statis-
tics (in this case, a keyword must be entered).
➤ Total
Goes to the total statistics frame containing the
same information as the daily statistics but refer-
ring to the time interval between the two dates
displayed.
➤ Print
Prints the daily/total statistics (option).
➤ Exit
Return to the previous screen.
Service Adjustments
In order to gain access to the “Reserved Calibrations
and Functions” it is necessary to enter a password.
Any incorrect operation within the functions described
below could impair the operation of the wheel balancing
machine. Unauthorized use will cause cancellation of
the warranty on the machine.
General Set-up
Select this to access the General Set-up screen.
Balancer Set-up
Select this to access the Balancing Set-up screen.
Special Functions
Select this to access the Special Functions screen.