COATS ProRide Wheel Balancer - Manual (Page 14)

10 • Important: Always read and follow instructions.
Screen-Saver Mode
If the machine remains on the initial screen for a
certain amount of time without being used, the sys-
tem automatically switches to a screen-saver. In most
cases, to reactivate the initial screen, just mount a
wheel, rotate the wheel or press a key to provide the
input to wake the balancer back up.
Home Screen
Buttons enabled:
Menu
Access the balancer’s main functions screen.
User
Select to access user memory functions.
Start
Press to spin assembly.
User Memory
Use the wheel balancer simultaneously by four differ-
ent users who, through a simple sequence, can memo-
rize their work condition and call it up when needed.
To enter in a user name access the special functions
screen and select the operator name option.
Buttons enabled:
User
Select a user into current program memory.
Load User
Select to recall a user’s memorized work condition.
Save User
Select to memorize the current user’s work condition.
Note: The dimensions memorized as USER are lost
when the machine is switched off.
Note: The current USER is always displayed in the
measurements and dimensions screens.