COATS 6200HS Truck Wheel Balancer - Manual (Page 37)

Operation Guide
31
TECHNICAL SPECIFICATIONS
Rim diameter range: 330-660mm (13-26")
Rim width range: 101-457mm (4-18")
Rim offset range: 76-297mm (3-11")
Maximum wheel diameter: 1300mm (50.5")
Maximum wheel weight: 227kg (500lbs)
Using standard mounting accessories. The Coats is
additionally capable of handling wheel weights of 500lbs
(227Kg) using special mounting techniques at very large
offsets. (ie. wheel and brake drum assemblies).
Power requirements:
Operates from 100/110/220/240 volt 50/60 Hz mains
supply depending on power converter supplied or from
its own built in rechargeable battery. Optional cable to
connect to any 12 volt car battery.
Balancer weight: 104kg (229lbs)
Balancer dimensions:
Height (H) 1145mm (45").
Floor area (L x W) 980x915mm.
(42"x36").
Shipping weight: (B920) 176kg (387lbs)
Shipping dimensions:
(L x W x H) (B920) 110"x100"x125"
Balancing modes:
Truck: Normal (clip-on), 4 Alu/Mag, and static.
Automobile: Normal (clip-on), 4 Alu/Mag, and
static.
Balancing accuracy:
Standard resolution: 25 grams (1 ounce) for
truck wheels - 5 grams (0.25 ounce) for
automobile wheels.
Fine resolution: 5 grams (0.25 ounce) for truck
wheels - 2 grams (0.10 ounce) for automobile
wheels.
Balancing cycle: 8 t o 2 0 seconds depending
on wheel size.
Calibration: Automatic self calibrating.