chiliGREEN W251CZQ - Manual (Page 197)

Modules & Options
Trusted Platform Module 7 - 71
7
9. As the computer restarts press F2 to enter the BIOS again and go to the TPM
Configuration menu.
10. Select Pending operation, press Enter and select the option you require (if you
are initializing TPM you should select Enable Take Ownership) and press Enter.
11. You will then need to press F4 to save the changes and restart the computer.
12. You can now install the TPM driver (see
“Trusted Platform Module (TPM)
Driver Installation” on page 7 - 72 ) and then initialize the TPM.
Figure 7 - 52
Pending Operation
(Enable Take
Ownership)