beautypg.com

Limited warranty – CHAMPION CH66 Manual User Manual

Page 6

background image

ii

Limited Warranty

LIMITED WARRANTY

Champion Industries and The Companies (The Companies), 3765 Champion Boulevard, Winston-Salem, North Carolina

27105, and P.O. Box 301, 2674 N. Service Road, Jordan Station, Canada, L0R 1S0, warrants machines, and parts,

as set out below.

Warranty of Machines:

The Companies warrant all new machines of its manufacture bearing the name "The Companies"

and installed within the United States and Canada to be free from defects in material and workmanship for a period of one (1)

year after the date of installation or fifteen (15) months after the date of shipment by The Companies, whichever occurs first.

[See below for special provisions relating to glasswashers.] Warranty registration must be submitted to Champion within ten

(10) days after installation either online on the Champion Industries website (http://www.championindustries.com/register) in

the USA or http://www.championindustries.com/canada/register in Canada or by fax on the form provided at the front of

this manual. If warranty registration is not returned within such period, the warranty will expire after one year from the date of

shipment.The Companies will not assume any responsibility for extra costs for installation in any area where there are jurisdic-

tional problems with local trades or unions.
If a defect in workmanship or material is found to exist within the warranty period, The Companies, at its election,

will either repair or replace the defective machine or accept return of the machine for full credit; provided;

however, as to glasswashers, The Companies' obligation with respect to labor associated with any repairs shall end

(a) 120 days after shipment, or (b) 90 days after installation, whichever occurs first. In the event that The Companies

elect to repair, the labor and work to be performed in connection with the warranty shall be done during regular

working hours by The Companies' authorized service technician. Defective parts become the property of The Companies.

Use of replacement parts not authorized by The Companies will relieve The Companies of all further liability in connection

with its warranty. In no event will The Companies' warranty obligation exceed The Companies' charge for the machine.

The following are not covered by The Companies'' warranty:

a. Lighting of gas pilots or burners.

b. Cleaning of gas lines.

c. Replacement of fuses or resetting of overload breakers.

d. Adjustment of thermostats.

e. Adjustment of clutches.

f. Opening or closing of utility supply valves or switching of electrical supply current.

g. Cleaning of valves, strainers, screens, nozzles, or spray pipes.

h. Performance of regular maintenance and cleaning as outlined in operator’s guide.

i. Damages resulting from water conditions, accidents, alterations, improper use, abuse,

tampering, improper installation, or failure to follow maintenance and operation procedures.

j. Wear on Pulper cutter blocks, pulse vanes, and auger brush.

Examples of the defects not covered by warranty include, but are not limited to: (1) Damage to the exterior or

interior finish as a result of the above, (2) Use with utility service other than that designated on the rating plate,

(3) Improper connection to utility service, (4) Inadequate or excessive water pressure, (5) Corrosion from

chemicals dispensed in excess of recommended concentrations, (6) Failure of electrical components due to

connection of chemical dispensing equipment installed by others, (7) Leaks or damage resulting from such

leaks caused by the installer, including those at machine table connections or by connection of chemical

dispensing equipment installed by others, (8) Failure to comply with local building codes, (9) Damage

caused by labor dispute.

Warranty of Parts:

The Companies warrant all new machine parts produced or authorized by The Companies to be free

from defects in material and workmanship for a period of 90 days from date of invoice. If any defect in

material and workmanship is found to exist within the warranty period The Companies will replace the defective

part without charge.

DISCLAIMER OF WARRANTIES AND LIMITATIONS OF LIABILITY. THE COMPANIES' WARRANTY IS ONLY TO

THE EXTENT REFLECTED ABOVE. THE COMPANIES MAKE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUD-

ING, BUT NOT LIMITED, TO ANY WARRANTY OF MERCHANTABILITY, OR FITNESS OF PURPOSE. THE COMPA-

NIES SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. THE REMEDIES SET OUT ABOVE ARE

THE EXCLUSIVE REMEDIES FOR ANY DEFECTS FOUND TO EXIST IN THE COMPANIES DISHWASHING MA-

CHINES AND THE COMPANIES PARTS, AND ALL OTHER REMEDIES ARE EXCLUDED, INCLUDING ANY LIABILITY FOR

INCIDENTALS OR CONSEQUENTIAL DAMAGES.

The Companies do not authorize any other person, including persons who deal in The Companies' dishwashing machines

to change this warranty or create any other obligation in connection with The Companies' Dishwashing Machines.

This manual is related to the following products: