CHAMPION CH66 Manual - Manual (Page 25)

17
Operation
MD-44, MD-66 - Control Panel Operation
The final rinse pressure gauge is located behind the control panel. The top-mounted control panel contains
the Power ON/OFF switch, start push button, stop push button, and the water temperature gauges for the
wash tank and the final rinse. The function of these controls are:
A Final Rinse Pressure Gauge - Indicates the flowing water pressure during the final rinse.
Proper reading is 20-22 PSI.
B Power Switch - Turns power on and off to the dishwasher. The machine fills
automatically when the power is turned on.
C Cycle Light - Indicates when the dishwasher is ready for automatic operation.
D Start Push button - Pushing the Start push button sets the machine for automatic
operation. The conveyor and pumps start when a dish rack is
inserted into the machine.
E Stop Push button - Pushing the Stop push button stops the conveyor and pumps.
F Temperature Gauges - Temperature gauges indicate the water temperature in the wash
tank.The final rinse water temperature is indicated during the final
rinse.
START
POWER
ON
OFF STOP
Final Rinse
Pressure
WINSTON-SALEM,NC CHAMPION INDUSTRIES, INC.
10
0
30
20
PSI
60
50
40
20-22 PSI
Wash
Temperature
Final Rinse
Temperature
0
20
40 60
80
100
120 140
160
180
200
220
100
80
60
40
20
0
20
40 60
80
100
120 140
160
180
200
220
100
80
60
40
20
160°F/71°C 180-195°F
82-91°C
A
B
C
E
F
D
Model MD-44 Shown