2N Helios IP Configuration Manual v2.8 - Manual (Page 87)

87
2N TELEKOMUNIKACE a.s., www.2n.cz
®
a.
b.
c.
d.
5.4.7 Web Server
You can configure your intercom using a standard browser which 2N Helios IP
®
accesses the integrated web server. Use the secured HTTPS protocol for
communication between the browser and intercom. Having accessed the intercom,
enter the login name and password. The default login name and password are
a admin
nd respectively. We recommend you to change the default password as soon as 2n
possible.
The unction is used by the following intercom functions too: Web Server f
JPEG snapshot/MJPEG video download; refer to Streaming.
ONVIF protocol for video streaming, refer to Streaming.
HTTP commands for switch control, refer to Switches.
Event.HttpTrigger in 2N Helios IP Automation, refer to the respective
manual.
The unsecured HTTP protocol can be used for these special communication cases.
List of Parameters
Device name – set the device name to be displayed in the right upper corner of
the web interface, login window and other applications if available (2N Helios IP
®
Manager, Helios IP Network Scanner, etc). 2N®
Web interface language – set the default language for administration web
server login. Use the upper toolbar buttons to change the language temporarily.