2N Helios IP Configuration Manual v2.8 User Manual

Page 24

You can assign up to three user phone numbers to each Phone Book position. In case
the user is inaccessible on one number, the following number will be dialled after a
ringing timeout. Enable the

to enable dialling

Parallel call to following number

multiple numbers simultaneously. The phone number validity can also be time
profile-limited.

Phone number – enter the phone number of the station to which the call shall
be routed. Enter the address sip:[user_id@]domain[:port] for Direct SIP calling,
e.g.:

sip:[email protected]

sip:name@yourcompany

Enter device:device_name for calls to the

application. Set

2N Helios IP Mobile

the device name in the mobile application.

Enter

behind the phone

number to specify which SIP account shall be used for outgoing calls (account 1
or 2).

Time profile – assign a time profile to each phone number to define the number
validity. If the profile in inactive, the phone number is not used and the following
phone number is dialled if defined.
Helios IP Eye address – set the address of the PC to be sent a special UDP
message on each active user phone number call. With the aid of this message,
the

application displays the camera image screen for those

2N Helios Eye

users who are not provided with a display-equipped videophone. Enter the