2N Helios IP Configuration Manual v2.8 - Manual (Page 46)

46
2N TELEKOMUNIKACE a.s., www.2n.cz
®
extenders are connected and PoE supply is used).
Video input – choose one of the analogue camera inputs. You can change the
input by automation via the Action.SetCameraInput during operation.
Video standard – set the video standard for the camera connected. Modify the
value only if the automatic video standard detection does not work well (Auto
value).
External camera enabled – enable RTSP stream download from the external IP
camera. Complete the valid RTSP stream address or the username and password
to make the function work properly.
RTSP stream address – enter the IP camera RTSP stream address:
rtsp://camera_ip_address/parameters. The parameters are specific for the
selected IP camera model. If you choose another
intercom for 2N Helios IP
®
the external camera, enter http://ip_address/mjpeg_stream
Username – enter the username for the external IP camera authentication. The
parameter is obligatory only if the external IP camera requires authentication.
Password – enter the external IP camera authentication password. The
parameter is obligatory only if the external IP camera requires authentication.
Note
This setting is only available in the models equipped with an external
analogue camera input.