2N Helios IP Configuration Manual v2.8 - Manual (Page 14)

14
2N TELEKOMUNIKACE a.s., www.2n.cz
®
4. Signalling of Operational
Statuses
2N Helios IP
®
generates sounds to signal switching and changes of operational
statuses. Each status change is assigned a different type of tone. See the table below
for the list of signals.
Tone Meaning
User activated
This tone signals entering of the user activation code. The
activation code is used for user (Phone Book position) . activation
Refer to the Phone Book subsection for the activation code
settings.
User deactivated
This tone signals entering of the user deactivation code. The
deactivation code is used for user (Phone Book position) deactiva
tion. A deactivated user may not be called but the call can, if
necessary, be forwarded to a deputy if defined. Refer to the
. Phone Book subsection for the deactivation code settings
Profile activated
This tone signals profile
. This function helps enable activation
alerting of a user group in an office, for example. Refer to the
. Profile subsection for the activation code settings
Profile deactivated
This tone signals profile deactivation. This function helps, for
example, disable alerting of a user group in an office and routing
calls either to a pre-defined phone number (porter's lodge, e.g.)
or user mobile phones. Refer to the Profile subsection for the
. deactivation code settings
Note
Signalling of some of the above mentioned statuses can be modified; refer
to the User Sounds subsection.