2N Helios IP Configuration Manual v2.8 - Manual (Page 72)

72
2N TELEKOMUNIKACE a.s., www.2n.cz
®
a.
b.
c.
Set the video stream (video codec type, image resolution, frame rate and bit rate)
parameters in the
section. Video
Or, use the following RTSP Uri and choose a codec type other than the currently set
one:
rtsp://ip_intercom_address/h264_stream
rtsp://ip_intercom_address/mpeg_stream
rtsp://ip_intercom_address/mjpeg_stream
RTSP server enabled – enable the RTSP server function in the intercom.
Audio stream enabled – enable offering of video stream while establishing
connection with the RTSP server.
Video stream enabled – enable offering of audio stream while establishing
connection with the RTSP server.
Video codec – set the default video codec for RTSP streaming.