2N Helios IP Configuration Manual v2.8 - Manual (Page 27)

27
2N TELEKOMUNIKACE a.s., www.2n.cz
®
5.2.2 Time Profiles
Such intercom functions as outgoing calls and RFID card/numeric code access, for
example, can be time-limited by being assigned a
. By assigning a time time profile
profile you can:
block all calls to a selected user beyond the set time interval
block calls to selected phone numbers beyond the set time interval
block RFID access for a user beyond the set time interval
block numeric code access for a user beyond the set time interval
block switch activation beyond the set time interval
Assign a time profile according to a week time sheet to define availability of the
selected function. Just set from-to or days in the week on which the function shall be
available.
helps you create up to 20 time profiles (depending on the 2N Helios IP
®
2N
model) that can be assigned to the function; refer to the Phone Book, Helios IP
®
Access Cards and Switches settings.
The time profiles are defined not only using the week time sheet but also manually with
the aid of special activation/deactivation codes that you can assign to them after
arriving in/before leaving your office, for example. Enter the activation/deactivation
codes using the numeric keypad of your intercom or phone (during the intercom call).
Refer to the
/ menu for the time profile settings. Directory Time Profiles
Caution
In case you use the 2N
®
Manager for intercom configuration, Helios IP
we do not recommend you to modify the time profile settings via the web
interface.