beautypg.com

7 card reader, List of parameters – 2N Helios IP Configuration Manual v2.8 User Manual

Page 52

background image

52

2N TELEKOMUNIKACE a.s., www.2n.cz

®

5.3.7 Card Reader

This menu is available in the

and

models

2N Helios IP Vario

®

2N Helios IP Force

®

only. Configure the

card reader in the

menu.

2N Helios IP Verso

®

Extenders

The card reader helps you control access to your building effectively using contactless
RFID cards. The supported card types depend on the card reader model used.

The

and

card readers are equipped with

2N Helios IP Vario

®

2N Helios IP Force

®

an input/output Wiegand interface. The interface direction is configurable. In the input
mode, the interface can be used for connection of external card readers, fingerprint
readers, biometric data readers and so on. In the output mode, the interface helps
connect the intercom to the security exchange, e.g. and send IDs of the cards tapped
on the internal reader to this exchange.

The

(91371…U) and all

models are

2N Helios IP Vario

®

2N Helios IP Force

®

equipped with a red LED indicator. You can control the LED state via the digital inputs
on the card reader. Typically, this function helps signal the secured/unsecured state via
a wire from the security exchange to the intercom connected to one of the card reader
inputs.

List of Parameters