2N VoiceBlue Enterprise - User Manual - Manual (Page 85)

Communication Line Setting 6-13
•
GPRS provider's name – Name of GPRS service provider.
Please fill in only alphanumeric chars.
•
GPRS number – GPRS number which will be dialled during
GPRS connection establishment. You can get this number form
your GPRS provider.
•
APN (GPRS access point) – The name of GPRS access point
to internet network (it is usually something like this:
internet..).
You can get the APN form your GPRS provider.
•
GPRS initial AT commands – Optional parameter. GPRS
provider may use special AT command to establish GPRS
connection. You can fill this command to this column.
•
GPRS username – usename for GPRS connection – optional
in case when it is required
•
GPRS password - password for GPRS connection – optional
in case when it is required.
6.4. DISA lines
DISA line is used for incoming call. Most typical usage will be for
incoming calls from GSM network. It might also serve for
incoming calls from VoIP provider (SIP/H.323 line). DISA line
plays message/dial tone and then wait for DTMF dialing. After
receiving # (hash/pound key) character dials collected digits via
predefined SIP/H.323 line.
•
Type of DISA – selection of Basic DISA (continous dial tone)
or Basic IDSA with uploaded message (message must be in
ISDN a-law format and must not be bigger than 200kB).