Firmware updating – 2N VoiceBlue Enterprise - User Manual User Manual
Page 136
13-2 2N
®
VoiceBlue Enterprise
screen, as illustrated on fig. 69.
Fig. 69 – Adding of licence file
Select the path to the licence file by pressing the Browse button
and record the licence file into the 2N VoiceBlue Enterprise
gateway by pressing the Upload button.
13.2. Firmware updating
The firmware updating serves for exchange
of the firmware of the 2N VoiceBlue
Enterprise gateway. The updating must be
realised exclusively by the firmware
delivered by the gateway producer, or by
firmware loaded from the web pages of the
producer.
The firmware updating serves mainly for
recording of repairs of potential failures,
which the gateway may contain, or for
recording of new versions of software,
which contain new functions.
The file with the firmware is named root.tgz. and should have up
to 10 MB. The firmware updating lasts cca 5-10 minutes, when the
firmware is recorded into the gateway from the local network. If
the firmware is updated from the Internet, the delay caused by the
speed of your internet connection must be added.
The updating is realised by clicking to the Update item and then to
the Update firmware item. Then, the dialogue for adding of the
licence file is displayed, as illustrated on fig. 70.
Fig. 70 – Updating of firmware