2N VoiceBlue Enterprise - User Manual - Manual (Page 34)

3-10 2N
®
VoiceBlue Enterprise
codecs= - specifies Codecs, valid values are g711alaw, g711ulaw,
g729, separated by semicolon, at most three codecs are allowed
rej_calls= - specifies reference
number of Rejected calls code message (from 0 to 26, see a list of
all allowed messages and their reference numbers)
no_route= - specifies reference
number of No route
code message (from 0 to 26, see a list of all allowed messages and
their reference numbers)
desc= - specifies Description
replace linenr= - replaces H.323 line with a number> specified.
If H.323 lines list is empty, this command is not allowed, same
parameters as for a previous command are possible, if some
parameter is omitted when replacing, original value will be used
del - deletes H.323 line with a specified
Example: There is one H.323 line in a list. User decides to add a
new line with the only required parameter Numbers set to value
1234 (other will be set to the default values). Then he decides to
change Display name to value ”my name”, Description to value
”new h323 line” and to disable Fast start. Command line shell,
type help for more information or type exit to quit
>h323 ls
linenr=19 c_meth=D d_meth=AUTO gk_addr= gk_name=""
gw_addr= prefixes= endpt=T di
sp_name= numbers=1222 listen_port=1720 dtmf=SIG t_meth=CF
codecs=g711alaw rej_ca
lls=0 no_route=0 desc=""
>
>h323 add numbers=1234
Added successfuly
>
>h323 ls