2N VoiceBlue Enterprise - User Manual - Manual (Page 43)

Administration 3-19
er="vbegw" codecs=g711alaw;g711ulaw;g729 add_to_req=
reg_exp=0 REGISTER nat_b=0
nat_r=0 nat= no_route_code=0 desc="SIP line"
linenr=29 server= name="" disp_name="" listen_port=5061
user="" codecs= add_to_r
eq= reg_exp=300 REGISTER nat_b=0 nat_r=0 nat=
no_route_code=0 desc=""
>
>sip replace linenr=29 reg_exp=5000 CLIP codecs=g711alaw
g711alaw
Replaced successfuly
>
>sip ls
linenr=25 server=172.20.172.196 name="1111"
disp_name="1111" listen_port=5061 us
er="vbegw" codecs=g711alaw;g711ulaw;g729 add_to_req=
reg_exp=0 REGISTER nat_b=0
nat_r=0 nat= no_route_code=0 desc="SIP line"
linenr=29 server= name="" disp_name="" listen_port=5061
user="" codecs=g711alaw
add_to_req= reg_exp=5000 REGISTER CLIP nat_b=0 nat_r=0
nat= no_route_code=0 desc
=""
3.2.2.2 Menu States
Menu States allows you to control all the VoiceBlue devices and
present calls. It consists of two submenus: Devices and Calls.
Submenu Devices prints a list of all present VoiceBlue devices.
Submenu Calls prints a list of all active calls. These submenus are
just a text form of the same graphical menus available in
VoiceBlue web browser.