2N VoiceBlue Enterprise - User Manual - Manual (Page 42)

3-18 2N
®
VoiceBlue Enterprise
nat= - specifies NAT IP address
no_route_code= - specifies No route code
desc= - specifies Description
replace linenr= - replaces SIP line with number> specified. If
SIP line list is empty, this command is not allowed, same
parameters as for previous
command are possible, if some parameter is omitted when
replacing, original value will be used
del - deletes SIP line with a specified
Example: There is one SIP line in a list. User decides to add new
one with no parameters
specified (all parameters will be set to default values). Then he
decides to change Codecs to value g711alaw, Register expiration
time to 5000 and to enable CLIP.
Command line shell, type help for more information or type exit to
quit
>sip ls
linenr=25 server=172.20.172.196 name="1111"
disp_name="1111" listen_port=5061 us
er="vbegw" codecs=g711alaw;g711ulaw;g729 add_to_req=
reg_exp=0 REGISTER nat_b=0
nat_r=0 nat= no_route_code=0 desc="SIP line"
>
>sip add
No parameters identified, default values will be set
Added successfuly
>
>sip ls
linenr=25 server=172.20.172.196 name="1111"
disp_name="1111" listen_port=5061 us