Eppendorf S41i Incubator Shaker - Manual (Page 47)

47
S41i CO2 Incubator Shaker — Operating manual
5.5.9 COMMUNICATIONS screen
Abb. 22: Communications button
Fig. 22: Communications button
 Press Communications button to open the SET COMMUNICATIONS screen:
Ethernet is the default mode, which is why the IP Address is displayed.
If you need to change the IP address
 press that line to open a keypad for the first three digits:
 Use the OK button either to reset each of the four sets of digits (Address A, B, C and D) or to
cycle through each set and change any as needed.
 Press the button in the SET COMMUNICATIONS screen at any time to return to the MENU
screen.
5
Op
er
at
ion