4 setting the co2 level, 5 setting the shaking speed, Setting the co – Eppendorf S41i Incubator Shaker User Manual
Page 26: Level, Setting the shaking speed, S41i co2 incubator shaker — operating manual, Operation
S41i CO2 Incubator Shaker — Operating manual
26
Press the High Alarm line and use the popup keypad to set the temperature at which an alarm
will alert you to the temperature rising too high.
Press the Low Alarm line and use the popup keypad to set the temperature at which an alarm
will alert you to the temperature falling too low.
Press the Setpoint line and use the popup keypad to set the desired working temperature.
5.4.4
Setting the CO
2
level
At any time you can press the CO
2
line in the STATUS screen to open the CO
2
Range screen,
which allows you to set parameters for carbon dioxide in the chamber:
Press the High Alarm line and use the popup keypad to set the percentage at which an alarm
will alert you to the CO
2
level rising too high.
Press the Low Alarm line and use the popup keypad to set the temperature at which an alarm
will alert you to the CO
2
level falling too low.
Press the Setpoiint line and use the popup keypad to set the desired percentage of CO
2
in the
chamber.
5.4.5
Setting the shaking speed
At any time you can press the RPM line in the STATUS screen to open the Speed Range screen,
which allows you to set parameters for the shaking speed and run time:
5
Operation