Snorkel TB60 2001 - Manual (Page 58)

10. DAILY INSPECTION & MAINTENANCE
10 - 6 P/N 0082168
12. Bolts & fasteners
Visually inspect all fasteners to see that none is
missing or obviously loose.
Pay particular attention to all of the safety-wired
bolts (1). Neither the wire nor the bolt heads
should be damaged in any way. (Check the
turntable end of the boom and the end of the lift
cylinder for other safety-wired bolts. Check both
sides of the machine.)
2
Pay particular attention to all of the wheel nuts
(2). None should be visibly loose, missing, or
deformed.
3
4
Pay particular attention to all of the upper (3)
and all of the lower (4) (view from under the
machine) rotation-bearing bolts. None should
be visibly loose, missing, or have broken
heads.
13. Structural damage & welds
Visually inspect all welds for cracks, all
structural members for deformity, and all sheet
metal for dents that could interfere with
machine operation.
1
Pay particular attention to boom welds (1).
Closely inspect boom welds (1), all the way
around, for cracks.