Snorkel TB60 2001 - Manual (Page 16)

2. SAFETY DEVICES
2 - 4 P/N 0082168
„
PLATFORM WORK LIGHTS (option)
The platform work lights are located on top the
platform guardrail. Use the lights to improve
visibility when you are working aloft in dimly lit
areas. Do not use the platform work lights to
drive on public thoroughfares.
For more information about platform work lights
see the “OPTIONS” chapter.
„
DRIVING LIGHTS (option)
Two 30 watt headlights are located on top of the
front cowling, two 25 watt blinking taillights are
on the sides of the rear cowlings. Driving lights
help improve your visibility and help others see
you when you are driving on dimly lit work sites.
Driving lights are not for driving on public
thoroughfares.
For more information about driving lights see the
“OPTIONS” chapter.
„
MOTION WARNING ALARM (option)
The motion warning alarm emits a loud beeping
sound at ground level anytime the
DRIVE/STEER controller is in FORWARD or
REVERSE. This alarm alerts people on the
ground that the TB 60 is traveling along the
ground. The alarm itself is below the wiring box,
inside the front-right side of the turntable.
„
GFCI OUTLET (option)
The GFCI (ground fault circuit interrupt) is
located under the platform-control box. The GFCI
protects against short circuits to ground. When
there is a short to ground the GFCI automatically
shuts off power the way a circuit breaker would.
For more information about the GFCI see the
“OPTIONS” chapter.
„
GUARDRAILS
The guardrails help protect you from falling off
the platform. Be sure the guardrails are properly
installed and that the gate is in place.