Snorkel TB60 2001 - Manual (Page 56)

10. DAILY INSPECTION & MAINTENANCE
10 - 4 P/N 0082168
FORD GASOLINE ENGINES
4
5
6
Ford engines are liquid cooled. When Ford
engines are at operating temperature, 160°F -
190°F (71°C - 88°C), the coolant should be at
the HOT level (4). When Ford engines are cold,
there should be about 1 inch (2.5 cm) of
coolant in the bottom of the reservoir (5).
The coolant in Ford engines is half water and
half ethylene glycol.
To add coolant:
Turn the engine OFF at the ground-control
panel MASTER switch.
Remove the cap (6).
Add coolant and replace the cap (6).
6. Wiring harnesses
DEUTZ DIESEL ENGINE
1
FORD GASOLINE ENGINE
1
Inspect the wiring harness (1), on both sides of
the machine, for loose connections, broken
wires, and frayed insulation.
7. Battery terminals
DEUTZ DIESEL ENGINE
1
FORD GASOLINE ENGINE
1
Battery terminals (1) should be clean and free
of corrosion.