Apple Express Fax/Modem - Manual (Page 161)

Setting up AppleTalk Remote Access
Connecting to your office network with AppleTalk Remote Access allows you
to use all the Chooser devices from your office Macintosh AppleTalk
network, including printers, servers, and electronic mail.
To enable you to use AppleTalk Remote Access, a file containing special
commands, called a CCL file, is included on your modem installation disk.
You must put the file in your Extensions folder before using AppleTalk
Remote Access.
IMPORTANT For Data Server programs, such as AppleTalk Remote Access,
which do not use the modem connection tool, a serial driver replacement
translates serial driver information to a modem connection tool equivalent. In
this way, non–modem connection tool applications function as if they were
using an external modem over serial port A.
If the Express Modem 14400 CCL does not appear when you open the
Modem pop-up menu in the Remote Access Setup control panel, you should
use the following procedure:
1 Make sure AppleTalk Remote Access is properly installed.
2 Insert the Express Modem Disk in your disk drive and double-click the disk icon, if
necessary, to open the disk window.
3 Open the Modem Documents folder.
4 Drag the Express Modem 14400 CCL icon from the Modem Documents folder into your
Extensions folder in the System folder on your hard disk.
149 T I P S A N D T R O U B L E S H O O T I N G