Apple Express Fax/Modem - Manual (Page 141)

Protocol negotiation progress codes that work with ATW1 and S95.
40 CARRIER 300 Carrier detected at 300 bps
46 CARRIER 1200 Carrier detected at 1200 bps
47 CARRIER 2400 Carrier detected at 2400 bps
48 CARRIER 4800 Carrier detected at 4800 bps
49 CARRIER 7200 Carrier detected at 7200 bps
50 CARRIER 9600 Carrier detected at 9600 bps
51 CARRIER 12000 Carrier detected at 12000 bps
52 CARRIER 14400 Carrier detected at 14400 bps
66 COMPRESSION: CLASS 5 MNP class 5
67 COMPRESSION: V.42BIS V.42 bis compression
69 COMPRESSION:NONE No compression
70 PROTOCOL:NONE Asynchronous mode
77 PROTOCOL:LAP-M Error control mode with LAP-M protocol
80 PROTOCOL:ALT Error control mode with MNP protocol
128 MODEM IN USE Modem already in use for this or another
application
W n Progress result codes The ATW setting determines whether progress
result codes are displayed in addition to the ATX codes. Register S95
determines which progress result codes will be displayed.
0 Progress codes 40 through 80 disabled.
1 Progress codes 40 through 80 enabled.
2 Progress codes enabled; identical to W1.
When writing a CCL script, pay attention to result codes for scripts that
require a specific response. If progress codes are enabled, the following
strings appear on the screen during a connection (in this example,
V.22 bis connection with no error control):
m CARRIER 2400
m PROTOCOL:NONE
m CONNECT 2400
129 M O D E M C O M M A N D S E T