Apple Power Macintosh 4400 - Manual (Page 86)

m If you are using a MacIP server, click Select Zone. In the dialog box that
appears, choose the zone that contains the MacIP server you want to use
and then click OK. (Additionally, if you are connecting with Apple Remote
Access [ARA] you must open a connection before you can select a zone.)
7 Click the close box to close the TCP/IP control panel.
If you have made configuration changes, a message asks if you want to save
them. If you have changed the port, a message also tells you that the change
will interrupt any connections to TCP/IP services. For example, you may have
to quit and reopen a Web browser or e-mail software after saving changes.
8 To save your changes, click the Save button.
Your changes take effect immediately; you do not have to restart your
computer.
Getting more information about the TCP/IP control panel
Macintosh Guide contains information about additional capabilities available
in the TCP/IP control panel, such as
m using configurations, a way to save different TCP/IP settings and switch
among them as desired
m using the User Mode command to determine the availability of settings in
the TCP/IP control panel
m turning TCP/IP off to save RAM when you are not using a TCP/IP-based
network
For more information about these capabilities, click the h button in the
TCP/IP control panel.
86 Chapter 5