Apple Power Macintosh 4400 - Manual (Page 119)

Initializing a hard disk
You may never need to initialize a hard disk. This section helps you
determine whether you need to initialize your hard disk and tells you how to
do so, if it’s necessary.
When do you need to initialize a hard disk?
The hard disk inside your computer was initialized at the factory, so you
shouldn’t need to initialize it. You need to initialize a hard disk only if one of
the following is true:
m You purchase a hard disk that has not been initialized at the factory.
m Your hard disk is damaged.
If a hard disk needs to be initialized, the disk’s icon does not appear on the
desktop when you start up the computer using another disk.
If the hard disk you want to initialize is not the startup disk, you can use the
Drive Setup program to initialize it. Drive Setup is located on the CD-ROM
disc that contains system software. For instructions, start Drive Setup and
choose Drive Setup Guide from the Guide (h) menu.
If the hard disk you want to initialize is the startup disk, follow the
instructions in this section. First, start up from the CD-ROM disc that
contains system software. Then follow the instructions in “How to Initialize a
Hard Disk” later in this section.
WARNING Initializing a disk erases any information that may be on it.
Before you initialize a damaged disk, try to repair it as described in
“Testing and Repairing a Damaged Disk” earlier in this chapter.
119 Troubleshooting